Why does the flame extinguish immediately after ignition on my Zanussi ZGH62414XS Hob?
If the flame extinguishes immediately after ignition, the thermocouple may not be heated up sufficiently. After lighting the flame, keep the knob pushed for equal or less than 10 seconds.
What to do if there is no spark when trying to activate the spark generator on my Zanussi ZGH62414XS Hob?
If there is no spark when you try to activate the spark generator, it could be due to several reasons. First, ensure that your Zanussi Hob is correctly connected to the electrical supply. Second, check the fuse to confirm it's not blown; if it repeatedly blows, consult a qualified electrician. Finally, make sure the burner cap and crown are correctly placed.
How to fix an uneven flame ring on my Zanussi Hob?
An uneven flame ring is usually caused by a burner crown blocked with food residues. To resolve this, make sure that the injector is not blocked and the burner crown is clean.
How to fix a Zanussi ZGH62414XS Hob when there is no spark?
If there is no spark when you try to activate the spark generator on your Zanussi Hob, make sure that the burner cap and crown are placed correctly. After lighting the flame, keep the spark generator activated for equal or less than 10 seconds. Also, ensure that the injector is not blocked and the burner crown is clean.
Why is the flame ring uneven on my Zanussi Hob?
An uneven flame ring on your Zanussi Hob may be caused by a burner crown blocked with food residues.
General| Type | Gas Hob |
|---|---|
| Number of Burners | 4 |
| Material | Stainless Steel |
| Width | 60 cm |
| Ignition Type | Automatic |
| Flame Failure Safety Device | Yes |
| Colour | Stainless Steel |
| Gas Type | Natural Gas/ LPG |
| Safety Features | Flame Failure Device |
| Burner Types | Auxiliary |
| Cut-out Dimensions (WxD) | 56 x 48 cm |
To Next Page