To Next PageTo Next Page
Need help?Do you have a question about the Zanussi ZKT 623 LX and is the answer not in the manual?
General| Width | 60 cm |
|---|---|
| Number of Burners/Zones | 3 |
| Material | Glass ceramic |
| Residual heat indicator | Yes |
| Total power | 7.2 kW |
| Control type | Touch control |
| Safety features | Automatic safety switch off |
| Dimensions (W x D x H) | 590 x 520 x 55 mm |
Keep instructions safe and pay attention to the "Hints on safety" chapter for safe operation.
Covers electrical safety, child safety, safe usage, cleaning, and damage prevention.
Information on recycling packaging and proper disposal of old appliances, plus advice on contacting authorities.
Instructions for thorough cleaning of the ceramic glass surface and frame before initial operation.
Highlights ceramic glass, touch controls, dual zones, warm-keeping, and safety features.
General info, touch control operation, switching on/off, zone selection, and settings.
Details zone selection, dual zone control, and switching zones off.
Explains residual heat, child safety device, and automatic safety cut-off functions.
Guidance on selecting cookware, general hints, and tips for saving energy.
A chart detailing cooking methods and recommended switch positions for various foods.
Procedures for cleaning the ceramic glass surface after each use to prevent burnt-on spills.
Methods for removing light, stubborn, and special soiling like sugar or scratches.
A comprehensive list of checks for common hob malfunctions and error indicators.
Information on contacting the service centre for repairs and ordering spare parts.
Details standard and European guarantee conditions, plus a list of exclusions.
Provides contact details for general enquiries and customer care.
Safety hints for qualified installation and procedures for fitting into kitchen worktops.
Specific steps for cutting the worktop, sealing, and fixing the hob into place.
Detailed instructions for connecting the appliance to the mains by an electrician, including wiring diagrams.
Lists physical dimensions, cut-out requirements, power ratings, and standards compliance.
Explains the importance of the rating plate data for service and ordering spare parts.
