What to do if water flows inside Zanussi ZNFE18ES3 Refrigerator?
If water is flowing inside your Zanussi Refrigerator, it might be because food products are blocking water from flowing into the water collector; ensure that food products do not touch the rear plate. Alternatively, the water outlet may be clogged, so try cleaning it.
How to fix the lamp in Zanussi ZNFE18ES3 Refrigerator?
If the lamp in your Zanussi Refrigerator isn't working, first check if the lamp is in stand-by mode by closing and opening the door.
Why is there too much condensed water on the rear wall of my Zanussi ZNFE18ES3 Refrigerator?
If you notice too much condensed water on the rear wall of your Zanussi Refrigerator, the issue might be due to a few reasons. You may be opening the door too frequently, so try to open the door only when necessary. Also, ensure the door is closed completely. Check if stored food is properly wrapped; if not, wrap food in suitable packaging before storing it.
How to reduce noise from Zanussi ZNFE18ES3 Refrigerator?
If your Zanussi Refrigerator is making unusual noises, check to ensure that the appliance stands stable.
Why does the compressor in my Zanussi ZNFE18ES3 run constantly?
If the compressor in your Zanussi Refrigerator is running constantly, consider these potential causes. Ensure that food products placed in the appliance were cooled to room temperature before storing. Wait a few hours and then check the temperature again, especially if many food products were put in at the same time.
Why is the acoustic or visual alarm on my Zanussi Refrigerator activated?
If the acoustic or visual alarm is activated on your Zanussi Refrigerator, it could be due to a few reasons. The cabinet might have been recently switched on, or the temperature in the appliance might be too high. Also, check if the door is left open and close it.
Why doesn't the compressor start immediately in my Zanussi Refrigerator?
If the compressor in your Zanussi Refrigerator doesn't start immediately after pressing "FastFreeze" or changing the temperature, it's normal. The compressor starts after a period of time; no error has occurred.
Why temperature cannot be set in Zanussi Refrigerator?
If you cannot set the temperature on your Zanussi Refrigerator, it might be because the FastFreeze function is switched on. You can either manually switch off the FastFreeze function or wait until the function deactivates automatically to set the temperature.
Why is water flowing on the floor from my Zanussi Refrigerator?
If water is flowing on the floor from your Zanussi Refrigerator, it's possible that the melting water outlet is not connected to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray.
Why doesn't the door of my Zanussi Refrigerator open easily?
If the door of your Zanussi Refrigerator doesn't open easily, especially right after closing it, this is likely because you attempted to re-open the door immediately after closing. Wait a few seconds between closing and re-opening the door.
General| Brand | Zanussi |
|---|---|
| Model | ZNFE18ES3 |
| Category | Refrigerator |
| Language | English |
To Next Page