Heating
function
Application
Conventional
Cooking / Aqua
Clean
To bake and roast food on one shelf
position.
Refer to "Care and cleaning" chap‐
ter for more information about: Aqua
Clean.
6.3 Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements (according to EU 65/2014 and
EU 66/2014). Tests according to: IEC/EN
60350-1.
The oven door should be closed during
cooking so that the function is not interrupted
and the oven operates with the highest
energy efficiency possible.
When you use this function the lamp
automatically turns off.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter, Energy
Saving.
7. CLOCK FUNCTIONS
7.1 How to set: End of Cooking
To set the switch-off time for oven functions.
Step 1 Set the oven function and the temperature.
Step 2 Turn the knob for the timer to its full range.
Step 3 Turn the knob for the timer to set the switch-off time.
When the set time ends, the signal sounds and the oven turns off.
Step 4 Turn the knob for the oven functions and the knob for the temperature to the off position.
To set a heating function without a set cooking time, turn the knob for the timer to the initial position.
8. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
8.1 Inserting accessories
A small indentation at the top increases
safety. The indentations are also anti-tip
devices. The high rim around the shelf
prevents cookware from slipping of the shelf.
10 ENGLISH
To Next Page
Loading...
Need help?
General
