Why Zanussi Oven does not heat up?
Your Zanussi Oven might not be heating up because it is deactivated. Activate the oven to resolve this. Also, check if the clock is set, and ensure that the necessary settings are correctly configured. Another potential reason is that the automatic switch-off is activated or the Child Lock is on. Finally, a blown fuse could be the cause; if the fuse blows repeatedly, consult a qualified electrician.
What to do if my Zanussi ZOP37981XK won't turn on?
If you cannot activate or operate your Zanussi Oven, the issue might be related to its connection to the electrical supply. Check if the oven is correctly connected to the electrical supply, referring to the connection diagram if available.
What to do if my Zanussi ZOP37981XK shows an error code that is not in the manual?
If your Zanussi Oven displays an error code not listed in the manual, it indicates an electrical fault. First, deactivate the oven using the house fuse or the safety switch in the fuse box, then reactivate it. If the error code reappears, it is recommended to contact the Customer Care Department.
What to do if Zanussi ZOP37981XK Oven displays "F102"?
If the display of your Zanussi Oven shows "F102", it could be that the door is not fully closed. Ensure that the door is completely closed. If the issue persists, the door lock may be defective. In this case, deactivate the oven using the house fuse or the safety switch in the fuse box and then reactivate it. If "F102" is still displayed, contact the Customer Care Department.
How to fix Zanussi ZOP37981XK if it takes too long to cook or cooks too quickly?
If your Zanussi Oven is cooking dishes too slowly or too quickly, the temperature may be set too low or too high. Adjust the temperature as needed, and refer to the user manual for guidance.
Why is there steam and condensation in my Zanussi ZOP37981XK?
Steam and condensation may settle on the food and inside your Zanussi Oven if dishes are left in the oven for an extended period. Avoid leaving dishes in the oven for more than 15 to 20 minutes after cooking has finished.
How to deactivate demo mode on Zanussi Oven?
If your Zanussi Oven is activated but not heating up, the fan isn't working, and the display shows "Demo", the demo mode is likely activated. To deactivate it: 1. Deactivate the oven. 2. Press and hold the specified button. 3. Wait for the first digit on the display and the Demo indicator to blink. 4. Enter the code 2468 using the buttons to change the values and the button to confirm each digit. 5. The demo mode will deactivate once you confirm the last digit with the correct code.
What to do if my Zanussi ZOP37981XK Oven displays "C3"?
If your Zanussi Oven display shows "C3", the cleaning function is not working. This is likely because the door is not fully closed or the door lock is defective. Ensure that the door is fully closed to resolve this issue.
General| Type | Built-in |
|---|---|
| Oven Type | Electric |
| Energy Class | A |
| Control Type | Electronic |
| Color | Stainless Steel |
| Energy consumption (conventional) | 0.99 kWh |
| Cleaning | Catalytic |
| Number of ovens | 1 |
| Oven size | Large |
| Oven Capacity | 71 liters |
To Next Page