EasyManua.ls Logo

Zanussi ZRA33132WA - User Manual

Zanussi ZRA33132WA
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GETTING
STARTED?
EASY.
User Manual
ZRA33103WA
ZRA33103WV
ZRA33132WA
EN User Manual
Refrigerator

Questions and Answers

  • E
    Erin PriceAug 12, 2025
    What to do if the temperature in Zanussi Refrigerator is too low or too high?
    • T
      thomas57Aug 12, 2025
      If the temperature in your Zanussi Refrigerator is too low or too high, it could be due to a few reasons. The temperature regulator may not be set correctly, so try setting a higher or lower temperature. Also, the food products' temperature might be too high; allow them to cool to room temperature before storing. Finally, storing too many food products at the same time can also affect the temperature; try storing fewer items simultaneously.
  • J
    jacqueline93Aug 16, 2025
    Why is there too much condensed water on the rear wall of my Zanussi Refrigerator?
    • W
      Whitney FisherAug 16, 2025
      Too much condensed water on the rear wall of your Zanussi Refrigerator can occur if the door was opened too frequently; open the door only when necessary. It can also happen if the door wasn't closed completely; make sure the door is closed completely.
  • M
    Mr. Christopher RamosAug 20, 2025
    How to fix water flowing on the floor from Zanussi Refrigerator?
    • S
      Savannah SmithAug 20, 2025
      If water is flowing on the floor from your Zanussi Refrigerator, the melting water outlet might not be connected to the evaporative tray above the compressor. Attach the melting water outlet to the evaporative tray.
  • K
    kristina30Aug 23, 2025
    What to do if water flows inside the Zanussi ZRA33132WA?
    • N
      Nicholas BarryAug 23, 2025
      If water is flowing inside your Zanussi Refrigerator, the water outlet may be clogged; try cleaning it. Also, food products might be preventing water from flowing into the water collector; make sure that food products do not touch the rear plate.
  • M
    Michael FreemanAug 27, 2025
    How to reduce noise from a Zanussi ZRA33132WA Refrigerator?
    • J
      Justin KingAug 27, 2025
      If your Zanussi Refrigerator is noisy, it might not be supported properly. Check if the appliance stands stable.
  • E
    Evan TuckerAug 30, 2025
    Why the lamp does not work in Zanussi ZRA33132WA Refrigerator?
    • S
      Sean MedinaAug 30, 2025
      The lamp in your Zanussi Refrigerator may not work because it is in stand-by mode. Try closing and opening the door. If that doesn't work, refer to "Replacing the lamp".
  • D
    Darrell StoneSep 3, 2025
    Why does the Zanussi Refrigerator compressor operate continually?
    • J
      Julie Swanson PhDSep 3, 2025
      The Zanussi Refrigerator compressor might run constantly due to several reasons. The temperature setting could be incorrect (refer to the "Operation"/"Control panel" chapter), or too many food products were placed inside at once – wait a few hours and check the temperature again. The room temperature might be too high (refer to the climate class chart on the rating plate), or food products placed inside were too warm; allow them to cool before storing.
  • Q
    qmontgomerySep 7, 2025
    Why doesn't the door of my Zanussi Refrigerator open easily?
    • F
      Frank GarnerSep 7, 2025
      If the door of your Zanussi Refrigerator doesn't open easily, it might be because you attempted to re-open it immediately after closing. Wait a few seconds between closing and re-opening the door.

Zanussi ZRA33132WA Specifications

General IconGeneral
TypeFreestanding
Energy Efficiency ClassA+
ColorWhite
Freezer PositionBottom
Noise Level40 dB
Number of Shelves3
Number of Door Bins3
Climate ClassSN-T
Defrost SystemAutomatic

Related product manuals