How to prevent stains and water spots on Zanussi ZSLN1211 Dishwasher?
If you're seeing stains and dry water drops on glasses and dishes from your Zanussi Dishwasher, the rinse aid dosage may not be sufficient. Try adjusting the rinse aid dosage to a higher level. Also, the quality of the rinse aid itself could be the cause.
How to remove limescale deposits from my Zanussi ZSLN1211 Dishwasher?
To address limescale deposits in your Zanussi Dishwasher: * Check the salt level and refill if the indicator is on. * Ensure the salt container cap is tightly closed. * If using multi-functional tabs, also use salt and set the water softener regeneration. * Clean the appliance with suitable detergents if limescale persists. * You can also try a different detergent.
What to do if the Zanussi ZSLN1211 Dishwasher programme does not start?
If the Zanussi Dishwasher programme doesn't start, check that the appliance door is closed properly. If the delay start is set, either cancel the setting or wait for the countdown to finish. Also, the appliance may be recharging the resin inside the water softener, which takes about 5 minutes.
How to improve drying results in my Zanussi Dishwasher?
To improve drying results in your Zanussi Dishwasher: * Avoid leaving tableware inside the closed appliance for extended periods. * Ensure the rinse aid dispenser is full and the dosage is sufficient. Increase the dosage if needed. * Towel dry plastic items, as they may not dry as effectively. * Activate the AirDry function for optimal drying. * Always use rinse aid, even when using multi-tablets.
Why is my Zanussi Dishwasher door leaking?
If there's a small leak from your Zanussi Dishwasher door, the appliance might not be level. Try loosening or tightening the adjustable feet. Also, the door might not be centred; adjust the rear foot if applicable.
How to activate my Zanussi Dishwasher?
If you cannot activate your Zanussi Dishwasher, ensure that the mains plug is correctly connected to the mains socket and that there is no damaged fuse in the fuse box.
What to do if my Zanussi ZSLN1211 Dishwasher doesn't fill with water?
If your Zanussi Dishwasher isn't filling with water, check the following: * Ensure the water tap is fully open. * Verify that the water supply pressure is adequate. Contact your local water authority for information on water pressure. * Confirm that the water tap isn't clogged. * Inspect the inlet hose filter for clogs. * Make sure the inlet hose isn't kinked or bent.
Why is tableware dull after washing in my Zanussi Dishwasher?
General| Current | 10 A |
|---|---|
| Connected load | 1950 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Power consumption (left-on) | 5 W |
| Water consumption per cycle | 9.9 L |
| Energy consumption per cycle | 0.778 kWh |
| Cycle time | 240 min |
| Noise level | 49 dB |
| Drying system | AirDry |
| AquaStop function | - |
| Delay start (max) | 3 h |
| Inverter technology | Yes |
| Dishwashing programs | 90min, 160min 60°C, Eco 50°C, Pre-wash, Quick |
| Left-on mode duration | 1 min |
| Number of place settings | 9 place settings |
| Number of washing programs | 5 |
| Number of temperature settings | 3 |
| Door color | Not applicable |
| Cord length | 1.5 m |
| Display type | LED |
| Product size | Slimline (45 cm) |
| Appliance placement | Freestanding |
| Control panel color | White |
| Cutlery compartment type | Basket |
| Wi-Fi controlled | No |
Weight and Dimensions| Width | 446 mm |
|---|---|
| Height | 878 mm |
| Installation compartment depth | 550 mm |
| Installation compartment width | 450 mm |
| Installation compartment height | 900 mm |
| Installation compartment height (min) | 820 mm |
Safety precautions for children and vulnerable individuals using the appliance.
General safety rules and precautions for using the dishwasher.
Instructions and warnings related to the safe installation of the appliance.
Guidelines for safe electrical connection and wiring of the dishwasher.
Procedures and precautions for connecting the appliance to the water supply.
Instructions and warnings for safe and proper daily use of the appliance.
Information on safe servicing and disposal procedures for the appliance.
Guidelines and dimensions for building the dishwasher into kitchen cabinetry.
Information about safety caps on the door and potential hazards.
Explanation of the dishwasher's control panel buttons and indicators.
Explanations of various indicator lights on the control panel.
Details of available wash programmes, their load, and phases.
Table showing water, energy, and duration for different wash programmes.
How to access and use programme selection and user modes for settings.
Explanation of the water softener function and how to adjust its level.
How to activate or deactivate the rinse aid refill notification.
How to adjust the amount of rinse aid dispensed.
Information on acoustic signals for malfunctions and programme completion.
Explanation of the AirDry function for improved drying.
Information and instructions for filling the salt container.
Step-by-step instructions for filling the rinse aid dispenser.
How to add and use detergent in the dishwasher.
Guide on selecting and starting wash programmes, including delay start.
Instructions on how to load the dishwasher baskets for best results.
General advice for optimal cleaning, drying, and environmental protection.
Guidance on using salt, rinse aid, detergent, and transitioning from multi-tablets.
Final checks before starting a programme and advice on unloading baskets.
Instructions for cleaning the interior, exterior, and removal of foreign objects.
Detailed steps for cleaning the filter system and spray arms to ensure performance.
Troubleshooting problems with turning on the appliance or starting a wash programme.
Solutions for issues related to the appliance not filling or draining water.
Addressing sensor failures, pump issues, temperature errors, high water levels, and general malfunctions.
Resolving issues with poor washing, drying, streaks, spots, and wet dishes.
Troubleshooting door problems, unusual noises, circuit breaker trips, internal wetness, and odors.
Key technical data, dimensions, and link to the EU EPREL database.
To Next Page
