Why Zanussi Washer/Dryer machine does not dry or does not dry properly?
If your Zanussi Washer/Dryer isn't drying correctly, ensure that: * You have selected a suitable drying programme for your laundry. * You have set the correct drying time or dryness level. * The water tap is not turned on. * The drain filter is not clogged. * You have not overloaded the appliance.
How to open the door of my Zanussi ZWT 71401 WA?
If you cannot open the door of your Zanussi Washer/Dryer: * Make sure that the washing programme is finished. * Set the drain or the spin programme if there is water in the drum.
Why is my Zanussi ZWT 71401 WA not drying properly?
If your Zanussi Washer/Dryer isn't drying properly, make sure of the following: * You have selected a drying program suitable for your laundry. * You have set the correct drying time or dryness level. * The water tap is not turned on. * The drain filter is not blocked. * You have not overloaded the appliance.
Why Zanussi Washer/Dryer does not fill with water properly?
If your Zanussi Washer/Dryer isn't filling with water, check these items: * Ensure the water tap is fully open. * Verify the water supply pressure isn't too low. * Check that the water tap isn't clogged. * Make sure the inlet hose filter and valve filter aren't clogged. * Confirm the inlet hose has no kinks or bends. * Ensure the water inlet hose connection is correct. * Check that the drain hose is positioned correctly, ensuring it's not too low.
What to do if my Zanussi ZWT 71401 WA does not drain the water?
If your Zanussi Washer/Dryer isn't draining water, check these: * Ensure the sink spigot is not clogged. * Make sure the drain hose has no kinks or bends. * Check the drain filter for clogs and clean if necessary. * Verify the drain hose connection is correct. * If you set a programme without a drain phase, set the drain programme. * Set the drain programme if you set an option which ends with water in the tub.
Why does the spin phase not operate on my Zanussi ZWT 71401 WA Washer/Dryer?
If the spin phase isn't working or the wash cycle is longer than usual on your Zanussi Washer/Dryer: * Set the spin programme. * Make sure the drain filter isn't clogged; clean it if needed. * Manually adjust the items in the tub and restart the spin phase, as balance issues may be the cause.
Why is my Zanussi ZWT 71401 WA Washer/Dryer not filling with water properly?
If your Zanussi Washer/Dryer isn't filling with water correctly, check these: * Be sure that the water tap is open. * Confirm the water supply pressure isn't too low. * Ensure the water tap isn't blocked. * Check that the inlet hose filter and valve filter aren't clogged. * Make sure the inlet hose has no kinks or bends. * Verify the water inlet hose connection is correct. * Confirm the drain hose is positioned correctly, ensuring it's not too low.
Why the spin phase does not operate in my Zanussi ZWT 71401 WA?
If the spin phase of your Zanussi Washer/Dryer isn't working or the washing cycle is longer than usual: * Set the spin programme. * Make sure that the drain filter is not clogged. Clean the filter, if necessary. * Manually adjust the items in the tub and start the spin phase again. This problem may be caused by balance problems.
What to do if there is water on the floor from my Zanussi ZWT 71401 WA?
If you find water on the floor, check the following: * Ensure the water hose couplings are tight and not leaking. * Inspect the drain hose for damage. * Verify you're using the correct detergent in the right amount. * Confirm the emergency emptying cap is replaced into the filter. * Make sure the filter is properly screwed in after cleaning.
Why does my Zanussi Washer/Dryer make an unusual noise?
If your Zanussi Washer/Dryer is making unusual noises: * Ensure the appliance is correctly leveled. * Make sure the packaging and transit bolts have been removed. * Add more laundry to the drum, as the load may be too small.
General safety guidelines for operating the appliance safely and preventing damage.
Measures and warnings to ensure the safety of children around the appliance.
Steps for initial appliance setup and running the first wash cycle.
How to choose and set up a wash programme using the dial and buttons.
Instructions for using the machine solely as a dryer.
Methods for treating and removing common types of stains from fabrics.
Information on programmes for cottons, including temperature, load, and options.
Information on programmes for synthetic and mixed fabrics.
Specific programmes for delicate fabrics and denim items.
Programmes simulating hand washing and specific drying cycles.
Explanation of common error codes (E10, E20) and their troubleshooting.
Procedure to manually drain water from the machine in emergencies.
Solutions for issues like the door not closing or the machine not starting.
Troubleshooting for problems with water filling, draining, or immediate emptying.
Causes and solutions when the machine fails to empty or spin correctly.
Identifying and resolving causes of water on the floor and excessive machine noise.
General| Washing Capacity | 7 kg |
|---|---|
| Drying Capacity | 4 kg |
| Energy Efficiency Class | A+++ |
| Spin Speed | 1400 rpm |
| Dimensions (HxWxD) | 850 x 600 x 600 mm |
| Weight | 70 kg |
| Noise level (washing) | 58 dB |
| Colour | White |
| Loading type | Front-loading |
To Next Page