Why are the washing results not satisfactory with my Zanussi Washer/Dryer?
If your Zanussi Washer/Dryer isn't providing satisfactory washing results: * Increase the detergent quantity or switch to a different detergent. * Use special products to pre-treat stubborn stains. * Ensure you're setting the correct temperature. * Reduce the laundry load.
Why is my laundry full of different coloured fluff after using Zanussi Washer/Dryer?
If your laundry is full of different colored fluff after washing in your Zanussi Washer/Dryer, it means that the fabrics washed in the previous cycle released fluff of a different color. * Clean the clothes with a fluff remover. * The drying phase helps to eliminate some fluff. In case of an excessive amount of fluff in the drum, refer to section «FLUFF IN THE FABRICS».
What to do if you cannot set an option on Zanussi ZWT 71401 WA Washer/Dryer?
If you cannot set an option on your Zanussi Washer/Dryer, make sure that you press only the wanted button(s).
General| Washing Capacity | 7 kg |
|---|---|
| Drying Capacity | 4 kg |
| Energy Efficiency Class | A+++ |
| Spin Speed | 1400 rpm |
| Dimensions (HxWxD) | 850 x 600 x 600 mm |
| Weight | 70 kg |
| Noise level (washing) | 58 dB |
| Colour | White |
| Loading type | Front-loading |
General safety guidelines for operating the appliance safely and preventing damage.
Measures and warnings to ensure the safety of children around the appliance.
Steps for initial appliance setup and running the first wash cycle.
How to choose and set up a wash programme using the dial and buttons.
Instructions for using the machine solely as a dryer.
Methods for treating and removing common types of stains from fabrics.
Information on programmes for cottons, including temperature, load, and options.
Information on programmes for synthetic and mixed fabrics.
Specific programmes for delicate fabrics and denim items.
Programmes simulating hand washing and specific drying cycles.
Explanation of common error codes (E10, E20) and their troubleshooting.
Procedure to manually drain water from the machine in emergencies.
Solutions for issues like the door not closing or the machine not starting.
Troubleshooting for problems with water filling, draining, or immediate emptying.
Causes and solutions when the machine fails to empty or spin correctly.
Identifying and resolving causes of water on the floor and excessive machine noise.
To Next Page
