Zap Zappy 3 Pro-Flex - Maintenance; Battery Maintenance

17
Maintenance
Maintenance
Maintenance
Maintenance
Maintenance
Maintenance
Maintenance
Maintenance Z
Z
Z
Z APPY
APPY
APPY
APPY
3
3
3
3
PRO-FLEX
PRO-FLEX
PRO-FLEX
PRO-FLEX
Battery:
Battery:
Battery:
Battery: (for professional use only)
The ZAPPY
3
Pro-Flex is powered by three /four 12
volt, rechargeable batteries housed in a single
compartment. Other than recharging, these
batteries need no maintenance. To prolong
battery life, recharge the battery after each use.
You must also charge your ZAPPY
3
Pro-Flex if it
has not been used for 30 days or more. If you
need to replace the battery pack, it is located
inside the battery compartment on the footboard.
To get to the battery pack, remove the
compartment cover by loosening the screws. To
remove the batteries disconnect the wires from
the battery terminals. Replace the battery pack
with a new one and reconnect the wires. Follow
the instructions on charging batteries to charge
the new batteries.