Zebra MC2200 - Installing the Hand Strap

MC2200/MC2700 Quick Start Guide
10
Removing the Trigger Handle
Rotate the trigger handle toward the top of the device and lift up to remove.
Alternately, rotate the trigger handle toward the bottom of the device and lift up to remove.
Installing the Hand Strap
Installing the Hand Strap on Device
1. Insert the hand strap clip into the hand strap clip slot on the bottom of the device.
F
2. Feed the top end of the hand strap through the hand strap mount at the top of the device.
1
2
MN-004030-02EN_mc2200-mc2700-qsg-en.fm Page 10 Monday, November 9, 2020 6:06 PM