TC57 Quick Start Guide
4
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD
precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
1.
Lift the access door.
2. Slide the microSD card holder door to the Open position.
3. Lift the microSD card holder door.
4. Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on each
side of the door.