Name: Zebra TC75x
Brand: Zebra
Rating: 4 (1 reviews)

To Next Page

To Previous Page

4 TC70x/TC75x

1. Remove access cover.

2. Insert a SIM card into the SIM slot with the cut edge toward the middle of the device and the contacts facing down.

3. Ensure that the SIM card is seated properly.

Installing the SAM Card

1. Remove access cover.

2. Insert a SAM card into the SAM slot with the cut edge toward the middle of the device and the contacts facing down.

NOTE The TC75x may contain one mini SIM slot and two nano SIM slots. If using a micro SIM card, a third-party

SIM adapter is required. By default, use a nano SIM card in slot 1.

CAUTION For proper electrostatic discharge (ESD) precautions to avoid damaging the Secure Access Module (SAM) card. Proper ESD

precautions include, but not limited to, working on an ESD mat and ensuring that the user is properly grounded.

NOTE The device contains one slot for a mini SAM card. If using a micro SAM card, a third-party adapter is required. When using a

SAM card, only a nano SIM card can be used.

mini SIM/SAM

Slot

nano SIM Slot

1 (default)

nano SIM

Slot 2

Questions and Answers:

Need help?

Do you have a question about the Zebra TC75x and is the answer not in the manual?

Zebra TC75x Specifications

General