Zebra ZD420 - General Media and Print Specifications

142
Appendix: Media
Types of Thermal Media
1/13/2016 ZD420 User’s Guide 212485-001 Rev. A
General Media and Print Specifications
• Media thickness:
• 0.08mm (0.003 inch) min – all requirements
• 0.1905mm (0.0075 inch) max – all requirements
• Media width:
• 60mm (2.36 inch) max
• 15mm (0.585 inch) min
• Media length:
• 990mm (39 inch) max
• 6.35mm (0.25 inch) min – Tear Off or Label
• 12.7mm(0.50 inch) min – Peel
• 25.4mm (1.0 inch) min - Cutter
• Media Roll Outer Diameter (O.D.) max: 127mm
• Media Roll Core Inner Diameter (I.D.):
• 12.7mm (0.5 inch) I.D. - Standard roll configuration
• 25.4mm (1 inch) I.D. - Standard roll configuration
• 38.1mm (1.5 inches) I.D. - with optional media roll adapter
• 50.8mm (2.0 inches) I.D. - with optional media roll adapter
• 76.2mm (3.0 inches) I.D. - with optional media roll adapter
• Print width:
• 1 dot (ZPL) min.
• 56mm (2.20 inches) max @ 203 dpi
• 54mm (2.12 inches) max @ 300 dpi
• Dot pitch:
• 203 dpi: 0.125mm (0.0049 inch)
• 300 dpi: 0.085mm (0.0033 inch)
• Barcode modulus x-dim:
• 203 dpi: 0.005-0.050 inch
• 300 dpi: 0.00327 - 0.03267 inch
• ZD420 Ribbon Cartridges
• Ribbon Length - 74 m (243 feet)
• Ribbon Widths - 110 mm (4.33 in.)
• Colors available in Black - Wax, Wax Resin, and Resin transfer materials