Need help?Do you have a question about the Zebra ZQ511 and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 10% to 90% non-condensing |
| Maximum Print Width | 2.83 inches/72 mm |
| Maximum Print Speed | 5 in./127 mm per second |
| Media Sensors | Gap, black mark |
| Connectivity | Bluetooth, USB |
| Battery | 3250 mAh, PowerPrecision+ Li-Ion |
| Durability | IP54-rated |
| Operating Temperature | 14°F to 122°F (-10°C to 50°C) |
| Storage Temperature | -40°F to 158°F/-40°C to 70°C |
| Memory | 256 MB Flash; 128 MB RAM |
| Supported Barcode Types | 1D, 2D |
| Supported Media Types | Labels |
| Dimensions | 2.75 in. H |
| Power Supply | AC adapter |
Manual contains proprietary information; use is restricted to operating and maintaining the equipment.
Product specifications and designs are subject to change without notice due to continuous improvement.
Zebra Technologies reserves the right to correct errors in manuals and disclaims resulting liability.
Limits Zebra Technologies' liability for damages arising from product use or inability to use.
Provides information about using the ZQ511 and ZQ521 mobile printers and accessories.
Details the configurations for ZQ511 and ZQ521 printers, including radios, display, and memory.
Guidance on contacting Zebra Customer Support and information required for service.
Steps to unpack the printer and check its components for any shipping damage.
Discusses printer technologies like PowerPrecision+ battery and direct thermal printing.
Covers product QR code, MFI, NFC, thermal shutdown, RFID, and physical features.
Covers battery preparation, installation, removal, safety precautions, and charging.
Details on vehicle cradle, battery eliminator, and multi-printer charging stations.
Instructions for loading printing media, including cover operation and media loading steps.
Details control panel buttons, display, status icons, LEDs, alerts, and power saving.
Methods for connecting the printer to a host, including cable communication and utilities.
Details on Bluetooth and WLAN setup, networking, security modes, and software configuration.
Guidelines for designing labels for different media types, including keep-out areas.
How to attach accessories like belt clip, hand strap, and shoulder strap for carrying.
Covers soft case and exoskeleton for protection and ruggedness.
How to maintain the printer, extending battery life and general cleaning procedures.
Interpreting LED lights and status icons on the control panel for diagnosing issues.
Solutions for common problems like no power, media feed, print quality, and no print.
Solutions for communication errors, label binding, blank LCD, and NFC connectivity.
Procedures for diagnosing issues, including printing configuration reports.
Entering dump mode for detailed data analysis of received data.
Guidance on how to contact Zebra support for unresolved issues.
Details on print width, speed, density, memory, and communications options.
Details on media width, length, thickness, and black mark requirements.
Available fonts and barcodes for CPCL programming language.
Available fonts and barcodes for ZPL programming language.
Details on USB port, weight, temperature, humidity, IP rating, and dimensions.
Physical dimensions of the ZQ511 and ZQ521 printer models.
Details and specifications for mounting the printers using screws.
List of optional accessories for the printers, accessible via QR code.
Information on finding serial/PCC numbers and USB cable details.
Recommendations for using Zebra media and cleaning supplies for optimal performance.
Proper procedures for disposing of batteries and printer components according to regulations.
List and explanation of various alert messages displayed by the printer for fault conditions.
To Next Page