Zebra ZQ511 User Manual

Using the Printer
19
Battery Safety
CAUTION: Avoid accidental short circuiting of any battery. Allowing battery terminals to contact conductive
material will create a short circuit which could cause burns and other injuries or could start a fire.
IMPORTANT: Always refer to the Important Safety Information data sheet shipped with each printer and
the Technical Bulletin shipped with each battery pack. These documents detail procedures to ensure
maximum reliability and safety while using this printer.
IMPORTANT: Always dispose of used batteries properly. Refer to Product Disposal on page 69 for more
battery recycling information.
CAUTION: Use of any charger not approved specifically by Zebra for use with its batteries could cause
damage to the battery pack or the printer and will void the warranty.
CAUTION: Do not incinerate, disassemble, short circuit, or expose to temperatures higher than 65°C
(149°F).

Zebra ZQ511 Specifications

General

Print Method	Direct Thermal
Resolution	203 dpi
Operating Humidity	10% to 90% non-condensing
Storage Humidity	10% to 90% non-condensing
Maximum Print Width	2.83 inches/72 mm
Maximum Print Speed	5 in./127 mm per second
Media Sensors	Gap, black mark
Connectivity	Bluetooth, USB
Battery	3250 mAh, PowerPrecision+ Li-Ion
Durability	IP54-rated
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Storage Temperature	-40°F to 158°F/-40°C to 70°C
Memory	256 MB Flash; 128 MB RAM
Supported Barcode Types	1D, 2D
Supported Media Types	Labels
Dimensions	2.75 in. H
Power Supply	AC adapter