Zebra ZQ511 User Manual

Using the Printer
29
Printer Status Icons
When the printer is in Power Save Mode and is not in a media out condition, the Power Save icon displays.
When the printer is in Power Save Mode and also in a media out condition, the blinking Media Out icon
displays instead of the Power Save icon. This is because the printer is not running when there is a media
out condition. If the printer is in both Power Save Mode and Draft Mode, the Power Save icon displays.
When the printer is in Draft Mode due to a user setting, the Draft Mode icon will be displayed. However,
when the printer is in Draft Mode and in a media out condition, the blinking Media Out icon will be
displayed.
For more detailed information on the printer status icons, see Printer Status Indicators on page 51
Icon
Description Icon
Description
Bluetooth Media
WiFi Connection Cover Open
WiFi Signal Strength Battery
Error Battery Eliminator
Data Power Save Mode
Draft Mode
DC

Zebra ZQ511 Specifications

General

Print Method	Direct Thermal
Resolution	203 dpi
Operating Humidity	10% to 90% non-condensing
Storage Humidity	10% to 90% non-condensing
Maximum Print Width	2.83 inches/72 mm
Maximum Print Speed	5 in./127 mm per second
Media Sensors	Gap, black mark
Connectivity	Bluetooth, USB
Battery	3250 mAh, PowerPrecision+ Li-Ion
Durability	IP54-rated
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Storage Temperature	-40°F to 158°F/-40°C to 70°C
Memory	256 MB Flash; 128 MB RAM
Supported Barcode Types	1D, 2D
Supported Media Types	Labels
Dimensions	2.75 in. H
Power Supply	AC adapter