Zebra ZQ511 User Manual

51
Troubleshooting
Front Control Panel
If the printer is not functioning properly, refer to the table below to determine the state of the LED indicator
ring located around the Power button.
Printer Status Indicators
The printer’s control panel displays multiple icons which indicate the status of various printer functions.
Check the indicator status and then refer to the Troubleshooting topic referenced on the following pages to
resolve the problem.
LED Indicator LED State Indication
Solid Green Charged Battery; Battery Eliminator in Use
Blinking Green Sleep Mode
Solid Amber Battery Charging
Solid Red Battery Fault
(( ))
Icon Status Indication
On Bluetooth link established
Grayed Out Inactive
Blinking Receiving printer data
Not Present No WLAN radio detected
Antenna Blinking Looking for AP
Antenna Blinking/1 Parenthesis Solid WLAN Associated/Attempting Authentication
Antenna and 2 Parentheses Solid WLAN Associated and Authenticated
Antenna and 2 Parentheses Blinking Receiving Data

Zebra ZQ511 Specifications

General

Print Method	Direct Thermal
Resolution	203 dpi
Operating Humidity	10% to 90% non-condensing
Storage Humidity	10% to 90% non-condensing
Maximum Print Width	2.83 inches/72 mm
Maximum Print Speed	5 in./127 mm per second
Media Sensors	Gap, black mark
Connectivity	Bluetooth, USB
Battery	3250 mAh, PowerPrecision+ Li-Ion
Durability	IP54-rated
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Storage Temperature	-40°F to 158°F/-40°C to 70°C
Memory	256 MB Flash; 128 MB RAM
Supported Barcode Types	1D, 2D
Supported Media Types	Labels
Dimensions	2.75 in. H
Power Supply	AC adapter