Zebra ZQ511 User Manual

Specifications
58
Label Specifications
NOTE: Customers who want to use the 12.5 mm (0.5 in.) core size will be required to uninstall the media
disks and install new media support disks.
Parameter ZQ521 ZQ511
Media Width 51 mm (2.0 in.) to
113 mm (4.45 in.) +1 mm
35 mm (1.37 in.) to
80 mm (3.15 in.) +1
mm
Media Length 12.5 mm
(0.5) minimum
Same
Black Bar Sensor to
Printhead Burnline
Distance
15.87 mm (0.62 in.) +/-
0.635 mm (0.025 in.)
Same
Media Thickness
(except Tag)
2.3 to 6.5 mils
(0.05842to 0.1651 mm)
Same
Max Tag Thickness 2.3 to 5.5 mils
(0.05842 to 0.1397 mm)
Same
Max Label Roll Outer
Diameter
57 mm (2.24 in.) 51 mm (2.0 in.)
Inner Core
Diameters**
19 mm (0.75 in.) standard
12.5 mm (0.5 in.) optional*
Same
Black Mark Location The reflective media black marks should be centered
on media roll
Same
Black Mark
Dimensions
Minimum mark width: 12,7 mm (0.5 in.) perpendicular
to inside edge of media, centered within the width of
the roll.
Mark length: 2.4-11 mm (0.09 to 0.43 in.) parallel to
inside edge of media.)
Same

Zebra ZQ511 Specifications

General

Print Method	Direct Thermal
Resolution	203 dpi
Operating Humidity	10% to 90% non-condensing
Storage Humidity	10% to 90% non-condensing
Maximum Print Width	2.83 inches/72 mm
Maximum Print Speed	5 in./127 mm per second
Media Sensors	Gap, black mark
Connectivity	Bluetooth, USB
Battery	3250 mAh, PowerPrecision+ Li-Ion
Durability	IP54-rated
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Storage Temperature	-40°F to 158°F/-40°C to 70°C
Memory	256 MB Flash; 128 MB RAM
Supported Barcode Types	1D, 2D
Supported Media Types	Labels
Dimensions	2.75 in. H
Power Supply	AC adapter