Zebra ZQ511 User Manual

Using the Printer
46
Shoulder Strap
A Shoulder Strap accessory is also offered to provide another option for comfortably carrying the ZQ511
and ZQ521 printers. Similar to the Hand Strap, the shoulder strap attaches to the two strap posts on the
front of the printer via rugged swivel snap hooks as shown in Figure 36. The strap is easily adjustable up to
56 inches from end to end.
Figure 36 Shoulder Strap
Soft Case
The printers have an environmental Soft Case option that helps protect the printer, while also allowing the
user to carry it from their belt. The paper path is left open to maintain printing capability and the controls
are visible and accessible while in the case. D-Ring connectors allow for attachment to the shoulder strap
option.
Figure 37 Soft Case
Adjustable
Clip
Swivel Snap
Hooks

Zebra ZQ511 Specifications

General

Print Method	Direct Thermal
Resolution	203 dpi
Operating Humidity	10% to 90% non-condensing
Storage Humidity	10% to 90% non-condensing
Maximum Print Width	2.83 inches/72 mm
Maximum Print Speed	5 in./127 mm per second
Media Sensors	Gap, black mark
Connectivity	Bluetooth, USB
Battery	3250 mAh, PowerPrecision+ Li-Ion
Durability	IP54-rated
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Storage Temperature	-40°F to 158°F/-40°C to 70°C
Memory	256 MB Flash; 128 MB RAM
Supported Barcode Types	1D, 2D
Supported Media Types	Labels
Dimensions	2.75 in. H
Power Supply	AC adapter