Need help?Do you have a question about the Zebra ZQ320 and is the answer not in the manual?
General| Display | No |
|---|---|
| Product color | Black |
| International Protection (IP) code | IP54 |
| Flash memory | 256 MB |
| Internal memory | 128 MB |
| Built-in barcodes | 2D |
| Page description languages | ZPL |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -15 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Media thickness | 0.06 - 0.16 mm |
| Maximum roll diameter | 40 mm |
| Windows operating systems supported | Yes |
| Wi-Fi standards | Wi-Fi 5 (802.11ac) |
| Bluetooth version | 4.0 |
| USB 2.0 ports quantity | 1 |
| Connectivity technology | Wired & Wireless |
| Print technology | Direct thermal |
| Maximum resolution | 203 x 203 DPI |
| Maximum print height | - mm |
| Maximum printing width | 72 mm |
| Battery voltage | 7.2 V |
| Battery capacity | 2280 mAh |
| PC connection | USB 2.0 |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 130 mm |
|---|---|
| Width | 117.7 mm |
| Height | 49.5 mm |
| Weight | 430 g |
Disclaims liability and limits responsibility for errors and consequential damages.
Details copyright ownership and legal implications of unauthorized reproduction.
Explains symbols and their meanings for warnings, important information, and notes.
Lists and describes essential software tools for printer configuration and management.
Details the intelligent battery pack with advanced metrics for performance and health.
Explains LED indicators for battery health and charging status.
Tapping the Print Touch icon with NFC smartphone provides printer-specific information.
Step-by-step guide to safely install and remove the printer's battery pack.
Details how to charge the printer using an AC-to-USB adapter and Type-C cable.
Explains LED indicators on the 1-slot charger for charge status.
Guidelines for designing labels for gap media to avoid registration issues.
Guidelines for designing labels for journal media, including safe printing zones.
Specifies dimensions for black marks on receipt media for proper sensor alignment.
Defines icons for power, media feed, fault status, battery, WiFi, and Bluetooth.
Describes LED indicators during the printer's startup sequence.
Explains LED patterns when the printer is in sleep mode.
Details LED indicators during the printer shutdown process.
Shows LED status during firmware download or forced download mode.
Details the color and pattern of the power button LED ring for various states.
Explains the battery level indication using LED bars.
Explains LED indicators for Bluetooth connection status and data transfer.
Details LED indicators for WiFi connection status and data transfer.
Details USB Type-C to Type-A cable connection for communication and charging.
Configures printers for LAN or Bluetooth using the Windows-based utility.
Configures printers via NFC, Bluetooth, or USB using an Android device.
Explains Bluetooth device addresses, pairing, and connection process.
Details available Bluetooth security modes and their implications.
Tips and practices to maximize the printer battery's lifespan and performance.
Safety and procedural guidelines for cleaning the printer components.
Details specific cleaning methods and recommended intervals for printer parts.
Explains how LED indicators signal printer status and issues.
Lists common problems and their potential causes and solutions.
Procedure to print printer configuration for diagnostics and reference.
Enables DUMP mode for detailed data transfer analysis.
Details print width, speed, head life, and density parameters.
Lists flash, RAM, and wireless/wired communication specifications.
Details media width, length, thickness, and mark dimensions.
Information on recycling and proper disposal of Lithium-Ion batteries.
Instructions for recycling and disposing of the printer unit.
Steps to locate and download the ZQ300 Series User Guide from Zebra's website.
Guide to locating and downloading software like ZebraNet Bridge and ZebraDesigner.
To Next Page
