51
ZQ300 Series User Guide
Adjustable Shoulder Strap
Refer to Figure 25 if you have ordered the shoulder strap op-
tion for your printer. Secure the clip on each end of the shoulder
strap to the clip openings (circled below) on the front of the print-
er. Use the main buckle on the shoulder strap to adjust to the de-
sired length.
NOTE: If you are using a shoulder strap, ensure it is pulled away
from the printer when installing in the docking cradles. See
pages 20-21.
Figure 25 • Shoulder Strap Installation
LoosenTighten
To Next Page
Loading...