50
ZQ300 Series User Guide
Wearing the Printer
Belt Clip
All ZQ300 Series printers have a belt clip shipped with the print-
er as a standard feature. The steps used to install the belt clip on
the printer are illustrated below. Once the belt clip is hooked over
your belt in a secure fashion, the belt clip will enable the printer to
pivot easily to allow for freedom of movement while either stand-
ing or sitting.
continued
Figure 24 • Belt Clip Installation
The viewing area of the printer’s faceplate (which displays bat-
tery life, Bluetooth, Wi and the error icons), is angled such that
it can be seen from above while the printer hangs from the belt
clip (as shown below).
1. 2.
3.
4.
To Next Page
Loading...