52
ZQ300 Series User Guide
Soft Case
The ZQ300 Series printers have an environmental Soft Case
option (p/n SG-MPM-SC31-01/SG-MPM-SC21-01) that helps
protect the printer, while also allowing the user to carry it from
their belt. The paper path is left open to maintain printing capabil-
ity and the controls are visible and accessible while in the case.
There is also a ap on the side of the case to allow access to the
USB port. D-Ring connectors allow for attachment to the shoul-
der strap option.
1. Open the top ap and slide the printer into the case.
2. Close the top ap and ensure that the paper path and con-
trols are visible through the plastic windows on the front of
the case.
3. Locate the aps that provide access to the paper path and
USB port, and also the opening for the belt clip.
Belt Clip
To Next Page
Loading...