Zebra ZQ320 - Designing Labels; Gap Media Label Design; Journal Media Label Design

24
ZQ300 Series User Guide
Designing Labels
The following examples provide guidelines for designing la-
bels for the ZQ300 Series printers, specically for Gap Media,
Black Bar Media and Journal Media. The illustrations for each
media type dene recommended tolerances, keep-out zones
and safe printing zones designed to avoid any vertical registra-
tion issues during printing. Dimensions are determined based
on product registration capabilities and Zebra-recommended
media tolerances.
Safe Printing Zone
1.59 mm
1.59 mm
1.25 mm
1.25 mm
“H”
Max Label Height = “H” = 2.5 mm
Bottom edge of
die-cut label
Top edge of
die-cut label
CPCL Label
Height
Media Feed Direction
Safe Printing Zone
Media Feed Direction
1.59 mm
1.59 mm
Figure 12 • Gap Media
Figure 13 • Journal Media