Zebra ZQ320 - WLAN Overview

48
ZQ300 Series User Guide
WLAN Overview
The Retail version of the ZQ320 printer are equipped with a
Dual Radio option, meaning a radio that uses both the industry
standard 802.11 protocols and Bluetooth 4.0. The T&L versions
of the printer will ship with Bluetooth only. Both will have the FCC
ID number on the serial number label on the back of the unit for
identication purposes.
• ZQ300 Series Wireless Network Printers with the Zebra
802.11 WLAN radio module can be identied by the text
“Wireless Network Printer” on the serial number label on the
back of the printer.
• These printers allow communication as a node within a wire-
less local area network (WLAN). Methods of establishing
communications to the printer will vary with each application.
More information and LAN conguration utilities are included
in the Zebra Net Bridge™ program (version 2.8 and later). Zebra
Setup Utilities (ZSU) can also be used to congure WLAN com-
munications settings. Both Net Bridge and ZSU may be down-
loaded from the Zebra Web site.
In order to obtain the Bluetooth address or the Wireless LAN
address, use a mobile computer to scan the Bluetooth barcode
or the WLAN barcode on the bottom of the printer where shown
in Figure 23.
WIFI
Barcode
Bluetooth
Barcode
TC51/56 Mobile
Computer
Figure 23 • BT/WLAN Communications