40
ZQ300 Series User Guide
Verify the Printer Is Working
Before you connect the ZQ300 Series printer to your computer,
portable data terminal or wireless LAN, make sure that the printer
is in proper working order. You can do this by printing a congu-
ration label using the “two key reset” method described on page
38. If you can’t get this label to print, refer to “Troubleshooting”.
Note • Refer to Fig. 27 for details on conguration report content.
The unit will print a line of interlocking “x” characters to ensure
all elements of the print head are working, print out the version of
software loaded in the printer, and then print the report.
The report indicates model, serial number, baud rate, and more
detailed information on the printer’s conguration and parameter
settings. (Refer to the Troubleshooting section for sample print-
outs and a further explanation on how to use the conguration la-
bel as a diagnostic tool.)
To Next Page
Loading...