Zebra ZQ511 User Manual

Using the Printer
25
3-Slot Battery Charger/Dual 3-Slot Battery Charger
Use Case: Settlement Room
The 3-Slot Battery Charger is a charging system for use with the 2-cell lithium-ion batteries used in the
printers. The 3-slot charger is capable of charging three 2-cell batteries simultaneously from empty to full in
less than four hours and 4-cell batteries from empty to fully charged in less than six hours. It can either be
used as a standalone charger or mounted on a 5-slot shared cradle.
Figure 15 3-Slot Battery Charger
Vehicle Adapter
Use Case: Vehicle
The printers, along with accompanying Zebra TC51/TC56 mobile computers, can be charged in the vehicle
though the use of a Vehicle Adapter. The Vehicle Adapter uses either an open-ended connection or
cigarette lighter adapter, along with a power supply.
Figure 16 Vehicle Adapters
Power Supply
Cigarette Lighter
Adapter
DC
Connector
Power Supply
Connector
Open-ended

Zebra ZQ511 Specifications

General

Print Method	Direct Thermal
Resolution	203 dpi
Operating Humidity	10% to 90% non-condensing
Storage Humidity	10% to 90% non-condensing
Maximum Print Width	2.83 inches/72 mm
Maximum Print Speed	5 in./127 mm per second
Media Sensors	Gap, black mark
Connectivity	Bluetooth, USB
Battery	3250 mAh, PowerPrecision+ Li-Ion
Durability	IP54-rated
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Storage Temperature	-40°F to 158°F/-40°C to 70°C
Memory	256 MB Flash; 128 MB RAM
Supported Barcode Types	1D, 2D
Supported Media Types	Labels
Dimensions	2.75 in. H
Power Supply	AC adapter