8
Introduction
Printer Features
1/13/2016 ZD420 User’s Guide 212485-001 Rev. A
Open the Printer
To access the media compartment, you must open the printer. Pull the release latches towards
you and lift the cover. Check the media compartment for loose or damaged components.
Closing the printer
Lower the top cover. Press down in the middle of the cover in front until the cover snaps closed.
Caution • The discharge of electrostatic energy that accumulates on the surface of the
human body or other surfaces can damage or destroy the printhead and other electronic
components used in this device. You must observe static-safe procedures when working
with the printhead or the electronic components under the top cover.
To Next Page
Loading...
