47
Setup
Connecting your Printer to a Computer
1/13/2016 ZD420 User’s Guide 212485-001 Rev. A
Ethernet (LAN, RJ-45)
The printer requires UTP RJ45 Ethernet cable rated CAT-5 or better.
The printer has a built-in network print server. For more information on configuring your printer to
run on a compatible Ethernet based network, see the Wired and Wireless Print Server users
guide. The printer must be configured to run on your network. The print server on board your
printer can be accessed through the printer’s print server Web pages.
Ethernet Status/Activity Indicators
The Ethernet connector on the printer has two (2) status/activity indicators that are partially
visible to provide interface status at the connector. The printer also has the control panel
indicator lights for printer network operation status, see the Meaning of the Indicator Light
Patterns on page 84 for more details.
LED Status Description
Both OFF No Ethernet link detected
Green 100 Mbps link detected
Green with the Amber flashing 100 Mbps link and Ethernet activity detected
Amber 10 Mbps link detected
Amber with the Green flashing 10 Mbps link and Ethernet activity detected
Ethernet Cable
(RJ45 Connector)
To Next Page
Loading...
