61
Setup for Windows OS
Bluetooth Option Configuration
1/13/2016 ZD420 User’s Guide 212485-001 Rev. A
9. The values set in the Authentication PIN field will vary depending on the Bluetooth version of the
master device. If the master uses BT v2.0 or older
, enter a numeric value in this field. You will be
prompted to enter this same value on the master device to verify pairing. Security Mode 2 or 3 in
Advanced Settings should also be selected for PIN paring.
10. If the master device uses BT v2.1 or newer, this setting has no effect. BT v2.1 and newer uses
Secure Simple Paring (SSP) which does not require the use of a PIN.
11. Clicking on the Advanced Settings button will display the Advanced Bluetooth Settings window.
For more information on Advanced Settings, refer to the Wired and Wireless Print Server
Guide.
12. Click Next to continue configuring your printer.
13. The SGD commands to properly configure your printer will be displayed. Click Next to continue to
the Send Data screen.
14. On the Send Data screen, you may click on the Printer that you want to immediately send the
commands to or you may click on the File button to save the commands to a file on your computer
that can be sent to one or more printers at a later time.
15. To send the commands to the printer, click on the Finish button and the printer will be updated
and then reboot. You may disconnect the USB interface from your printer now.
16. To complete the Bluetooth pairing process, enable Bluetooth device discovery on your master
device and follow the directions provided with the master device.
To Next Page
Loading...
