63
Setup for Windows OS
Bluetooth Option Configuration
1/13/2016 ZD420 User’s Guide 212485-001 Rev. A
Connecting to a Windows Vista
®
SP2 or Windows 7
®
Master Device
The Windows Vista (SP2 or higher) and Windows 7 Bluetooth install differs from the XP install.
• Windows Vista: Open the ‘Add Printer’ wizard by clicking the ‘Start’ button, clicking
‘Control Panel’, clicking ‘Hardware and Sound’, clicking ‘Printers’, and then clicking ‘Add a
printer’.
• Windows 7: Open Devices and Printers by clicking the ‘Start’ button, and then, on the
‘Start’ menu, clicking ‘Devices and Printers’
• Some non-Microsoft Bluetooth dongles and built-in Bluetooth devices in the host PC’s
have marginal driver support for Secure Simple Paring (SSP) printing and may not
complete the ‘Add printer’ wizard normally. You may need to go to the ‘Bluetooth Devices’
in the ‘Control Panel’ or from the system tray on the Windows ‘Start’ bar and activate SPP
for the ‘device’, your Bluetooth printer you are installing. Install the printer to a local printer
(USB or Serial Port for your ZD420 printer) and then change the ‘Port’ after the install has
completed to the SPP (virtual serial port) COM port.
1. Access the ‘Devices and Printers’ from the Windows Start menu ( ).
2. Check for Bluetooth devices in the ‘Devices and Printers’ window. Note the generic Windows
Bluetooth icon below.
To Next Page
Loading...
