79
Print Operations
Using the Label Dispenser Option
1/13/2016 ZD420 User’s Guide 212485-001 Rev. A
5. Press and release the Feed (Advance) button one or more times until a label gets presented for
removal. Repeat one more time and then tear the exposed liner exiting from the bottom of the
label dispenser.
6. During the print job, the printer will peel off the backing and present a single label. Take the label
from the printer to allow the printer to print the next label. Note: If you did not activate the label
taken sensor to detect the removal of the dispensed (peeled) label with software commands, the
printer will stack and eject peeled labels.
To Next Page
Loading...
