Zebra ZD500 series User Manual

v
1/16/2014 ZD500 Series™ TThermal Transfer Printer User’s Guide P1062653-002Rev. A
Taiwan Restricted Frequencies
5.15-5.25 GHz, 該頻段將在臺灣不可用。
For 5.15 - 5.25 GHz, this frequency band will not be available in Taiwan.
Korean Compliance Statement
이 기기는 가정용 (B 급 ) 전자파 적합기기 로서 주로 가정에서 사용하는 것을 목적으로
하며 , 모든 지역에서 사용할 수 있습니다 .
The equipment is for home use (Class B) and has acquired electromagnetic conformity
registration, so it can be used not only in residential area but other areas as well.
This radio device is not allowed to be used for human safety since it has possibility of radio
interference during operation.
European Regulatory Information
Note • Member states in the EU with restrictive use for this device are crossed out. This
device is also authorized for use in all EFTA member states (CH, IS, LI, NO).

Zebra ZD500 series Specifications

General

Print Method	Thermal Transfer and Direct Thermal
Resolution	203 dpi (8 dots/mm)
Max Print Width	4.09" (104 mm)
Max Print Length	39" (991 mm)
Media Sensors	Reflective and Transmissive
Media Length	39 in./991 mm
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Operating Humidity	20% to 85% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)
Connectivity	Ethernet, Serial, Bluetooth
Memory	128 MB Flash
Programming Languages	ZPL