Zebra ZD500 series - Page 80

Printer Configuration
Changing Printer Settings
68
P1062653-002 Rev. A ZD500 Series™ Thermal Transfer Printer User’s Guide 1/16/2014
RFID Void
Counter
Resets the RFID void label counter to zero.
Accepted values:
N/A
Related ZPL command(s):
~RO
SGD command used: odometer.rfid.void_resettable
Printer web page: N/A
RFID Tag
Calibration
Initiate tag calibration for RFID media. (Not the same as manual calibration for media.)
Accepted values:
N/A
Related ZPL command(s):
^HR
SGD command used: rfid.tag.calibrate
Printer web page: N/A
Table 10 • RFID Menu (Continued)