Zebra ZD500 series - Page 85

73
Printer Configuration
Changing Printer Settings
1/16/2014 ZD500 Series™ Thermal Transfer Printer User’s Guide P1062653-002 Rev. A
Host Handshake Set the Host Handshake Protocol Value
Select the handshake protocol that matches the one being used by the host computer.
Accepted values:
• XON/XOFF
• RTS/CTS
• DSR/DTR
Related ZPL command(s):
^SC
SGD command used:
comm.handshake
Printer web page:
View and Modify Printer Settings >
Serial Communications Setup
Parallel Mode Set the parallel port to allow two-way or one-way host to printer communication.
Select the method that matches the one being used by the host computer for various
error and status messages from the printer.
Accepted values:
• "bidirectional"
• "unidirectional"
Related ZPL command(s):
^SC
SGD command used:
parallel_port.mode
Printer web page:
View and Modify Printer Settings >
Serial Communications Setup
Table 13 • PORTS Menu (Continued)