Zebra ZD500 series - Page 86

Printer Configuration
Changing Printer Settings
74
P1062653-002 Rev. A ZD500 Series™ Thermal Transfer Printer User’s Guide 1/16/2014
BLUETOOTH Menu
Table 14 • BLUETOOTH Menu
Bluetooth
Address
Displays the printer’s Bluetooth Device Address
Accepted values:
N/A
SGD command used:
bluetooth.address
Mode Displays the Bluetooth connection pair printer’s device type - Slave (typical) or Master.
Accepted values: N/A
SGD command used:
N/A
Discovery Sets and displays if the printer is ‘Discoverable’ for Bluetooth device pairing.
Accepted values:
"on" = enables Bluetooth discoverable mode
"off" = disables Bluetooth discoverable mode
SGD command used:
bluetooth.discoverable
Connected Displays the Bluetooth connection status to it’s paired device - Yes or No
Accepted values: N/A
SGD command used: N/A
BT Spec Version Displays the Bluetooth operational specification level. This printer’s Bluetooth radio is
operating to Bluetooth Spec. 3.0
Accepted values:
N/A
SGD command used:
bluetooth.radio_version
Min. Security
Mode
Displays the printer’s Bluetooth minimum level of applied security - Security Mode 1
Accepted values:
N/A
SGD command used: N/A