Zebra ZM400 - Page 4

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE P/N 14202L REV. 2 04/09/07
Eltron Programming Language® (EPL II®)
• Compatible with mainframe, mini, and PC hosts
• Four position field rotation (0º, 90º, 180º, 270º)
• Variable field support (00 to 99)
• Counter support (up to 10)
• Variable field addition and subtraction
• Status reporting
• Form storage
• Metered print odometer
Communications Specifications
• USB 2.0
• IEEE 1284 Bi-directional parallel interface
• High-speed serial interfaces
- RS-232C, with DB9F connector
- Configurable baud rate (300 – 115,200kB), parity,
and data bits. Stop bits at 1 or 2.
- Software (XON/XOFF), hardware (DTR/DSR, or
RTS/CTS) communication handshake protocols
- RS422/485 with optional adapter.
• ZebraNet
®
Wireless Plus Print Server – 802.11b/g - compliant
wireless print server
•
ZebraNet
®
10/100 Print Server - Ethernet network print server
(10BASE-T, 100BASE-TX)
Electrical Specifications
• Auto-detectable 90-265VAC, 48-62 Hz, 5A fused power
supply
• Agency approvals: IEC 60950-1 EN 55022 Class B,
EN55024, EN 61000-3-2, EN 61000-3-3.
• Product Markings: cTUVus, CE, FCC-B, ICES-003, VCCI,
C-Tick, NOM, S-Mark (Arg), CCC, GOST-R, BSMI, MIC,
ZIK, SABS
Physical Specifications
• Height: 13.3" (338mm)
• Width: 10.9" (278mm)
• Depth: 18.7" (475mm)
• Weight: 32.4lbs. (15kg)
• Shipping Weight: 49 lbs (22kg)
Environmental Specifications
• Operating environment:
Thermal Transfer = 40º to 104ºF (5º to 40ºC)
Direct Thermal = 32º to 104ºF (0º to 40ºC)
20% to 85% non-condensing R.H.
• Storage/Transportation environment:
-40º to 140ºF (-40º to 60ºC)
5% to 85% non-condensing R.H.
Preventative Maintenance
Zebra recommends cleaning the printer on a regular basis using
standard Zebra printer parts and cleaning supplies. Consult your
User’s Guide for further details.
• Cleaning:
The exterior is cleaned with a lint-free cloth, and if necessary,
a mild detergent solution or desktop cleaner. Interior
components (print head, platen roller, media sensor, peel bar,
ribbon and media paths) are cleaned with alcohol or blown air
to remove any particles.