Zebra ZQ320 - Proprietary and Legal Information; Liability Disclaimer; Copyrights

P1096702-001 • Introduction • -1-4 •
Section 1: ZQ320 Introduction
Thank you for choosing our Zebra
®
ZQ320™ Mobile Printer. You will nd this rugged
printer will become a productive and efcient addition to your workplace thanks to its
innovative design. Zebra Technologies is the leader in industrial printers with world-
class support for all of your bar code printers, software, and supplies.
This repair manual gives you the information you will need to repair the ZQ320,
including the Made for iPhone
®
(MFi) printers. MFi printers provide Apple co-processor
(MFi) support which allows an Apple device such as an iPhone or iPad
®
to authenticate
and connect over Bluetooth
®
.
The ZQ320 printer uses CPCL and ZPL programming languages. To create
and print labels using the CPCL and ZPL languages, refer to the Mobile Printing
Systems CPCL Programming Manual and ZPL Programming Guide (available at
www.zebra.com/manuals
)
ZQ300 Series Software Utilities:
• Zebra Net Bridge™ : printer conguration, eet management
• Zebra Setup Utility: single printer conguration, quick setup
• Zebra Mobile Setup Utility: Android-based setup tool
• Zebra Designer Pro: label design
• Zebra Designer Drivers: Windows
®
driver
• OPOS Driver: Windows driver
• Multiplatform SDK
(These utilities can be found at www.zebra.com and on the product CD.)
Unpacking and Inspection
Inspect the printer for possible shipping damage:
• Check all exterior surfaces for damage.
• Open the media cover (refer to “Loading the Media” in the Getting Ready to Print
section) and inspect the media compartment for damage.
In case shipping is required, save the carton and all packing material.