22
ZQ500 Series User Guide
Loading the Media in the ZQ500 Series Printers
The ZQ500 Series printers are designed to print either continu-
ous (receipt) media or label stock.
Loading Media Procedure
1. Open the printer (Refer to Figure 7).
• Press the Media Cover Button on the side of the printer as
shown in “1” below. The Media Cover will open automatical-
ly.
• Rotate the Media Cover back completely as shown in “2”, ex-
posing the media compartment and adjustable media sup-
ports.
Figure 7: Opening the Printer
1
Media Cover
Media Cover
Button
Media
Compartment
Media Supports
To Next Page
Loading...