Zebra ZQ510 - Unpacking and Inspection; Reporting Damage; ZQ500 Series Technology; Smart Battery

9
ZQ500 Series User Guide
Unpacking and Inspection
• Check all exterior surfaces for damage.
• Open the media cover (refer to “Loading the Media” in the
Getting Ready to Print section) and inspect the media com-
partment for damage.
In case shipping is required, save the carton and all packing ma-
terial.
Reporting Damage
If you discover shipping damage:
• Immediately notify and file a damage report with the shipping
company. Zebra Technologies Corporation is not responsi-
ble for any damage incurred during shipment of the printer
and will not cover the repair of this damage under its warran-
ty policy.
• Keep the carton and all packing material for inspection.
• Notify your authorized Zebra re-seller.
ZQ500 Series Technology
The ZQ500 Series printers use several technologies made pop-
ular in other Zebra Mobile Printer product lines.
Smart Battery
The ZQ500 Series battery pack is a high capacity, smart Lithium
Ion battery that contains electronics which allow the printer to
monitor its operating parameters. Among these are the number
of charge cycles it has undergone and its date of manufacture.
Using these parameters, the printer’s software can monitor the
battery’s condition and alert the user when to recharge or remove
the battery from service.
Operating Temperature Charging Temperature Storage Temperature
-20
0
C to +55
0
C
(-4
o
F to 131
o
F)
0
0
C to +40
0
C
(32
o
F to 104
o
F)
-25
0
C to +65
0
C
(-13
o
F to 149
o
F)
The ZQ510 and ZQ520 printers will only function properly with genuine
Zebra smart battery packs.