56
ZQ630 User Guide
Wearing the Printer
Swivel Belt Clip
The ZQ630 printer has a plastic swivel belt clip (P1031365-028)
included as a standard feature. To use: hook the clip over your belt,
and ensure that the clip is securely attached to the belt. The belt
clip will pivot to allow you to move freely while wearing the printer.
In order to install or remove the plastic Belt Clip you will need to
remove the battery pack. The printer also has the option of using
a more rigid metal belt clip (P1050667-031) which screws onto
the printer using two (2) 6-32 x 1/4 Pan Head Phillips screws. The
metal clip also attaches to the printer while housed in the Hard
Case (P1050667-034) using two (2) 6-32 x 5/8 Pan Head Phillips
screws.
Figure 28 • Printer with Belt Clips
Plastic
Belt Clip
Metal Belt Clip
with and without
Hard Case
To Next Page
Loading...