59
ZQ630 User Guide
Hand Strap
The ZQ630 hand strap accessory (p/n P1031365-027) attaches
to the printer’s cut-outs to provide the user with a convenient and
secure method of carrying the printer.
Figure 31 • Using the Hand Strap
1. Insert the loop on the end of the
strap through the cut out on the front of
the printer as shown below.
2. Loop the end of the strap back
around the cut out and secure it over
the button.
3. Repeat this process for the
opposite end of the strap.
To Next Page
Loading...