Zebra ZQ630 - Specifications; Printing Specifications; Memory and Communications Specifications

73
ZQ630 User Guide
Specications
Note • Printer specications are subject to change without notice.
Printing Specications
Parameter ZQ630
Print Width Up to 104 mm (4.1 in.)
Print Speed 101.6 mm (4 in.)/second
127 mm (5 in.)/second in Draft Mode
Printhead Burn
Line to Tear
Edge Distance
4.06 mm (0.16 in.) +/- .25 mm (.01”)
Printhead Life No less than 1 million inches of media fed using Zebra media.
Print Density 203 dots/in. or better
Memory and Communications Specications
Parameter ZQ630
Flash Memory 512 MB
1
RAM Memory 256 MB
1
Standard
Communications
RS-232 serial port (14 Pin serial connector)
Congurable Baud rate (from 9600 to 115.2 Kbps), parity and data
bits.
Software (X-ON/X-OFF) or hardware (DTR/STR) communication
handshake protocols.
USB 2.0 Full Speed Interface (12 Mbps)
Wireless
Communication
Options
1. Dual Radio: 802.11ac with Bluetooth v4.1 (both Classic & BLE)
2. Bluetooth v4.1 (both Classic & BLE)
Real Time Clock
(RTC)
Time and date under application control. Refer to ZPL Programming
Manual, available at www.zebra.com/manuals for RTC commands.
Ethernet 10 or 100 mps Ethernet auto detect when docked in cradle.
1. Memory conguration on your printer may be ascertained by printing a conguration
label as detailed on page 68.