Zebra ZQ630 - Page 89

89
ZQ630 User Guide
TOOLS Menu
PRINT INFORMATION
SETTINGS
PRINT
Prints a printer conguration label,
sensor prole, barcode information, font
information, images, formats, two-key
report, and network settings.
SGD: device.user_vars.display_
wmlsg_printlist
BACKLIGHT TIMEOUT
10
Sets the duration of the LCD backlight in
seconds.
SGD: display.backlight_on_time
POWER UP ACTION
NO MOTION
Set the action for the printer to take during
the power-up sequence, i.e. no motion,
calibrate, etc.
SGD: ezpl.power_up_action
HEAD CLOSE ACTION
FEED
Set the action for the printer to take when
you close the printhead, i.e. feed, calibrate,
etc.
SGD: ezpl.head_close_action
LOAD DEFAULTS
FACTORY
Restore specic printer, print server,
and network settings back to the factory
defaults. Use care when loading defaults
because you will need to reload all settings
that you changed manually. This menu
item is available through two user menus
with di󰀨erent default values for each.
SGD: ezpl.load_defaults