Zebra ZT400 Series User Manual

1019 I H- 5120VN D
About This Document
Who Should Use This Document
10
Who Should Use This Document
This User Guide is intended for use by any person who needs to perform routine maintenance,
upgrade, or troubleshoot problems with the printer.
How This Document Is Organized
The User Guide is set up as follows:
Section Description
Introduction on page 11 This section provides a high-level overview of the
printer and its components.
Printer Setup and Operation
on page 25
This section assists the technician with initial setup
and operation of the printer.
Printer Configuration and Adjustment
on page 99
This section assists you with configuration of and
adjustments to the printer.
Routine Maintenance on page 155 This section provides routine cleaning and
maintenance procedures.
Troubleshooting on page 171 This section provides information about errors that
you might need to troubleshoot. Assorted
diagnostic tests are included.
Specifications on page 213 This section lists general printer specifications,
printing specifications, ribbon specifications, and
media specifications.
Glossary on page 223 The glossary provides a list of common terms.

Zebra ZT400 Series Specifications

General

Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Humidity	20% to 85% non-condensing
Print Width	4.09 in (104 mm)
Print Resolution	203 dpi
Max Print Speed	14 ips (356 mm/s)
Media Sensors	Transmissive and reflective
Connectivity	USB 2.0, Serial RS-232, 10/100 Ethernet, Bluetooth 4.1
Memory	256 MB RAM, 512 MB Flash
Media Width	4.5 in./114 mm
Media Length	39 in (991 mm)
Ribbon Length	450 m
Supported Media Types	Continuous, die-cut, notch, black-mark
Operating Temperature	40°F to 104°F (5°C to 40°C)
Power Requirements	100-240 VAC, 47-63 Hz
Dimensions	19.50 x 10.75 inches (495 x 274 mm)