Zebra ZT400 Series User Manual

1019 I H- 5120VN D
13
Introduction
Communication Interfaces
Communication Interfaces
The communication interface connectors are shown in Figure 2. A ZebraNet wireless print
server option may also be present on your printer. You may send label formats to the printer
through any communication interface that is available on your printer.
• For detailed information about the types of connections available, see Communication
Interface Specifications on page 214.
• For instructions on when and how to connect your computer to one ore more of these
communication interfaces, see Install the Printer Driver and Connect the Printer to the
Computer on page 62.
Figure 2 • Location of Communication Interfaces
Internal wired Ethernet print server
Serial port
USB port
Parallel port (optional)

Zebra ZT400 Series Specifications

General

Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Humidity	20% to 85% non-condensing
Print Width	4.09 in (104 mm)
Print Resolution	203 dpi
Max Print Speed	14 ips (356 mm/s)
Media Sensors	Transmissive and reflective
Connectivity	USB 2.0, Serial RS-232, 10/100 Ethernet, Bluetooth 4.1
Memory	256 MB RAM, 512 MB Flash
Media Width	4.5 in./114 mm
Media Length	39 in (991 mm)
Ribbon Length	450 m
Supported Media Types	Continuous, die-cut, notch, black-mark
Operating Temperature	40°F to 104°F (5°C to 40°C)
Power Requirements	100-240 VAC, 47-63 Hz
Dimensions	19.50 x 10.75 inches (495 x 274 mm)