1019 I H- 5120VN D
29
Printer Setup and Operation
Select a Print Mode
CUTTER Use if the printer has a cutter option when
you want the labels to be cut apart.
The printer prints a label and then cuts it
free.
Cutter mode
PEEL Use if the printer has the Peel-Off option,
the Liner Take-Up option, or the Rewind
option.
The printer peels the label from the liner
during printing and then pauses until the
label is removed. The liner exits the front of
the printer.
Peel-Off mode
Table 4 • Print Modes and Printer Options
Print Mode When to Use/Printer Options Required Printer Actions
Red solid lines = media, Blue dotted lines = backing only
To Next Page
Loading...