1019 I H- 5120VN D
Printer Setup and Operation
Install the Printer Driver and Connect the Printer to the Computer—Ethernet
86
8. Click Next.
You are prompted to select an installation option.
9. Click Install Printer.
You are prompted to select a printer type.
10. Select your printer model and resolution.
The model and resolution are on a part number sticker on the printer, usually located
below the media hanger. The information will be in the following format:
Par t Number : XXXXXxY – xxxxxxxx
where
XXXXX = the printer model
Y = the printer resolution (2 = 203 dpi, 3 = 300 dpi, 6 = 600 dpi)
For example, in the part number ZT420x3 – xxxxxxxx
ZT420 indicates that the printer is a ZT420 model
3 indicates that the printhead resolution is 300 dpi
To Next Page
Loading...