• Green LED blinks rapidly for 2secsand will goes off.
(plug and play)
BT mode connectivity:
• Now open the BT menu in your smart phone / Laptop or
any other device and scan for the name BT Keyboard and
pair to it.
• Once connected, the LED blinking will stop.
• To enter BT discover mode, press the 'FN' key and 'BT1 /
BT2 / BT3' key together (long press) mode. You can notice
the LED blinks rapidly to indicate the BT discover mode.
3 BT connection and switching
between the connections:
• Once connected to the devices, you can press the 'FN'key
and 'BT1 / BT2 / BT3'key together (short press) to switch
among the 3 BT connections.
• This helps you to keep the keyboard connected to all 3
devices in the same time and allows you to switch between
them as per requirement.
• Power on the mouse by using slide switch at bottom of
the mouse.
• To enter to 2.4GHz RF discover mode, short press 'Mode
switch'at bottom of the mouse.
Instructions for use Mouse:
• The keyboard supports up to 3 BT connections, which
can be switched as per usage. For instance, you can
connect your smart phone, Laptop and other BT supported
device on BT1 / BT2 / BT3 respectively.
• Now plug the USB Nano receiver to your PC/ Laptop
RF 2.4GHz mode connection with USB Nano receiver:
USB port.
• The mouse will start working in 2.4GHz RF mode
To Next Page